Chapter 2: MediaDirector 2252B/2251B component replacement
6. Install PCI Riser 2-3 assembly as follows:
a. Grasping the riser assembly with both hands, lower the back end of the riser assembly first,
clearing the LTC connector from the rear panel as you position the riser assembly over the riser
slot.
b. Align the front end of the edge connector on PCI Riser 2 with the corresponding riser slot on the
server board.
NOTE:
The add-in cards installed in PCI Riser 3 may obstruct your view, making it
difficult to align its edge connector with the corresponding riser slot.
Example:
30
