manualshive.com logo in svg

Harman SoundCraft Vi3000, User Manual

The Harman SoundCraft Vi3000 is a powerful digital mixing console designed to deliver superior sound quality for live performances. Easily access the user manual to learn how to maximize the potential of this state-of-the-art product. Download the manual for free from manualshive.com and unleash the full capabilities of your Vi3000.

Share
Download
background image

 

4.3: INPUT CHANNEL > DYNAMICS

Vi3000 USER MANUAL

®

4.3 

INPUT CHANNEL > De Esser

Vi3000 USER MANUAL

®

16.4 

16.4:  MENU > SYNC

 

16.4:  MENU > SYNC

The settings in this tab determine the digital audio clock configuration for the console

Menu: SYNC

Internal Clock 

Internal sync 
selected. (NB: not 
a control)

The console runs at 48kHz internal clock only.

External Clock 

External clock 
source selected 
(NB: not a control)

The console switches to External Worclock automatically if 
a valid 48kHz wordclock signal is received at the rear panel 
BNC Wordclock In connector, or Dante Sync mode is set to 
Master.
A green LED adjacent to the Wordclock In BNC socket indi-
cates a valid lock to external clock.
In order for the console to lock to the external clock its fre-
quency must be 48kHz +/-100ppm. 

Summary of Contents for SoundCraft Vi3000











































































































































































































Reviews:

No comments

Related manuals for SoundCraft Vi3000

Hamilton Beach 62660 User Manual preview
62660
Brand: Hamilton Beach Pages: 28
Euphonix Max Air Control surface Manual preview
Max Air Control surface
Brand: Euphonix Pages: 82
Lagrange 609 001 Instruction Book preview
609 001
Brand: Lagrange Pages: 86
Radio Shack 32-2057 Quick Start Manual preview
32-2057
Brand: Radio Shack Pages: 2
Airpatch 2AU4S-716 Manual preview
2AU4S-716
Brand: Airpatch Pages: 16
GRANGE equipment GRPF10 User Manual preview
GRPF10
Brand: GRANGE equipment Pages: 8
Behringer VINTAGE DISTORTION VD1 Quick Start Manual preview
VINTAGE DISTORTION VD1
Brand: Behringer Pages: 2
Origin Effects REVIVALDRIVE HOT ROD EDITION Owner'S Manual preview
REVIVALDRIVE HOT ROD EDITION
Brand: Origin Effects Pages: 20
White and Brown MP 568 Ruby User Manual preview
MP 568 Ruby
Brand: White and Brown Pages: 12
Bad Cat X-TREME TONE Operating Manual preview
X-TREME TONE
Brand: Bad Cat Pages: 2
Alto PBM8.350 UM User Manual preview
PBM8.350 UM
Brand: Alto Pages: 14
Harley Benton AC TrueTone 256818 User Manual preview
AC TrueTone 256818
Brand: Harley Benton Pages: 20
Varimixer TEDDY W5A Operating Instructions Manual preview
TEDDY W5A
Brand: Varimixer Pages: 8
Boss F1 Phaser Instructions Manual preview
F1 Phaser
Brand: Boss Pages: 6
GPX HM102B User Manual preview
HM102B
Brand: GPX Pages: 2
Behringer X32 DIGITAL MIXER Quick Start Manual preview
X32 DIGITAL MIXER
Brand: Behringer Pages: 22
Nady Audio MM4 Owner'S Manual preview
MM4
Brand: Nady Audio Pages: 10
Linear Technology LTC5549 Demo Manual preview
LTC5549
Brand: Linear Technology Pages: 6

Brands by name

Popular brands

Load more brands