Harman SoundCraft Vi3000, User Manual

Page: 109 / 202

Bus Meters
Show the buss master
signal levels.
Bus Masters can be configured as stereo channels,
therefore the Bus Master Strip level meters have left
and right meters (i.e. the left and right channels share
a single set of controls, but note that this feature is re-
served for a future release). The GRM shows the overall
gain reduction of the limiter and compressor, if they are
engaged. The Dynamics from Stereo Bus Masters are al-
ways linked, therefore both GRMs show the same value.
The overload LED indicates a value that is higher than
Full Scale (analogue output-stage clipping).
Mix Master
Meters
The L,R and C Output
Masters each have a
Level Meter and a Gain
Reduction Meter. The
L and R masters share
a stereo meter, and the
C master has a mono
version.
The overload LED indicates a value that is higher than
Full Scale (analogue output-stage clipping).
Monitor Bus
Metering
The monitor section has
a stereo level meter, but
there is no GRM associ-
ated with the monitor.
Vi3000 USER MANUAL
®
12.2 12.2: METERING > BUSSES
12.2: METERING > BUSSES
Bus Master Metering