Harman SoundCraft Vi3000, User Manual

Page: 132 / 202

4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
®
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
®
14.3.4 14.3.4: CUES > GPIO
14.3.4: CUES > GPIO
14.3.4: Cue GPIO Detail
GPI On
Active
Enable GPI triggering
for recall of this cue. Enable GPI
for this cue
GPI Virtual Pin
Select
Range Low Range High
Select a virtual GPIO
pin as a recall trigger for
this cue.
0 80
Selecting a the GPIO column in the cue list gives access to that cue’s GPIO (General Purpose Input Output) settings.
The VST screen is split into GPI (input) and GPO (output) sections. The inputs section sets an input to be used as a
recall trigger for this cue, while the output section defines an output to be triggered when the cue is recalled. The cue
GPIO system uses ‘virtual pins’ that are mapped to physical pins in the master GPIO settings screen.