6
INITIAL INSTALLATION
1
ON
OFF
ON
OFF
Turn off circuit breakers and wall switch to the fan
supply line leads. (Fig. 1)
DANGER:
Failure to disconnect power supply
prior to installation may result in serious injury or
death.
1.
Check to make sure blades (H) are at least 30 in.
from any obstruction and at least 7 ft. above the
floor. (Fig. 2)
7 ft.
min.
30 in.
min.
2
H
2.
3
4
Secure mounting bracket (B) to outlet box using
screws, spring washers, and flat washers provided
with the outlet box. (Fig. 3) Pull wires from outlet
box through center hole in mounting bracket (B).
*
Note: It is very important that you use the proper
hardware when installing the mounting bracket (B)
as this will support the fan.
3.
B
D
P
O
Remove motor screws (O) and 5.4 M/M lock
washers (P) from underside of motor and save for
blade arm (G) attachment later on. [If there are
plastic motor blocks installed with motor screws (O)
and 5.4 M/M lock washers (P), discard the plastic
motor blocks.] (Fig. 4)
4.
