9
WIRING
1B.
FAN CONTROLLED BY PULL CHAIN, LIGHT
BY WALL SWITCH:
If you intend to control the fan
light with a separate wall switch, connect
BLACK
wire from fan to
BLACK
wire from ceiling. Connect
BLUE
wire from fan to the
BLACK
wire from the
independent wall switch for the light. Connect
WHITE
wire from fan to
WHITE
wire from ceiling.
Connect
GROUND
(
GREEN
) wire from mounting
bracket to
BARE
/
GREEN
wire from ceiling. (Fig. 1B)
FAN CONTROLLED BY PULL CHAIN, LIGHT BY
WALL SWITCH
WHITE
BLACK
BLACK (WALL SWITCH)
GROUND/GREEN (BARE)
BLACK
BLUE
WHITE
FROM FAN
FAN
120 V Power
FROM
CEILING
WHITE
1B
GREEN
Wrap electrical tape around each individual wire
connector (CC) down to the wire as shown in Fig. 2.
WARNING:
Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of box
from the black and blue (if applicable) connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
CC
CC
2
CC
CC
E3 Wire Connector x4
2.
Hardware Used
1C.
FAN AND LIGHT CONTROLLED BY TWO
WALL SWITCHES:
If you intend to control the fan
and light with separate wall switches, connect
BLACK
wire from fan to
BLACK
wire from the
independent wall switch for the fan. Connect
BLUE
wire from fan to the
BLACK
wire from the other
independent wall switch for the light. Connect
WHITE
wire from fan to
WHITE
wire from ceiling. Connect
GROUND
(
GREEN
) wire from mounting bracket to
BARE
/
GREEN
wire from ceiling. (Fig. 1C)
Note:
Black wire is hot power for fan. Blue wire is hot
power for light kit. White wire is common for fan and
light kit. Green or bare wire is ground.
WHITE
BLACK (WALL SWITCH)
BLACK (WALL SWITCH FOR LIGHT)
GROUND/GREEN (BARE)
BLACK
BLUE
WHITE
FROM FAN
FAN
120 V Power
FROM
CEILING
FAN AND LIGHT CONTROLLED BY TWO WALL
SWITCHES
WHITE
1C
GREEN
