15
At least twice each year, lower motor housing (A) to check motor assembly (D), and then
tighten all screws on fan. Clean motor housing (A) with only a soft brush or lint-free cloth to
avoid scratching the finish. Clean blades (H) with a lint-free cloth. You may occasionally apply a
light coat of furniture polish to wood blades for added protection.
Important:
Shut off main power supply before beginning any maintenance. Do not use water or
a damp cloth to clean the ceiling fan.
CARE AND MAINTENANCE
TROUBLESHOOTING
If you have any questions regarding the product please call customer service at
1-800-527-1292
,
8:30 a.m. - 5 p.m., CST, Monday - Friday.
Warning
: Before beginning work, shut off the power supply to avoid electrical shock.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Fan does not move.
1. Reverse switch not engaged.
1. Push switch firmly either
to the
right or to the left.
2. Power is off or fuse is blown.
2. Turn power on or check fuse.
3. Faulty wire connection.
3. Turn power off.
Loosen motor
housing (A) and check all
connections.
Noisy operation.
1. Blades (H) are loose.
1. Tighten all blade screws (AA).
2. Cracked blade (H).
2. Replace blade (H).
3. Full range dimmer switch
3. Replace with an approved
speed control device.
4. Fan is new.
4. Allow fan a "break in" period of a
few days, especially when running
the fan at Medium and High
speeds.
5. Motor housing (A) is loose.
5. Turn power off. Carefully loosen
motor housing (A) and verify that
mounting bracket (B) is secure
according to instructions on
page
10.
Excessive wobbling.
1. Blades (H) are loose.
1.
Tighten all blade screws (AA).
2. Blade arms (G) incorrectly
2. Re-install blade arms (G).
attached.
3. Unbalanced blades (H).
3.
Switch one blade (H) with a
blade (H) from the opposite side.
4. Fan not securely mounted.
4. Turn power off. Carefully loosen
motor housing (A) and verify that
mounting bracket (B) is secure.
Fan operates but lights
1. Bulb(s) not installed correctly.
1. Re-install bulb(s).
fail (if applicable).
2. Wires in outlet box not wired
2. Check wires in outlet box and, if
properly.
necessary, re-wire according to
instructions on pages 8 and 9.
3. Wall switch to fan is off.
3. Make sure that wall switch to fan
is
on.
