background image

16

LIMITED LIFETIME WARRANTY: Litex Industries warrants this fan to be free from defects in 
workmanship and materials present at time of shipment from the factory for Lifetime limited from the 
date of purchase.  This warranty applies only to the original purchaser. Litex Industries agrees to 
correct any defect at no charge or, at our option, replace the ceiling fan with a comparable or superior 
model.

To obtain warranty service, present a copy of your sales receipt as proof of purchase.  All cost of 
removal and reinstallation are the express responsibility of the purchaser.  Any damage to the ceiling 
fan by accident, misuse or improper installation, or by using parts not produced by the manufacturer 
of this fan or affixing accessories not produced by the manufacturer of this fan, are the purchaser's 
own responsibility.  Litex Industries assumes no responsibility whatsoever for fan installation during 
the limited lifetime warranty.  Any service performed by an unauthorized person will render the 
warranty invalid.

Due to varying climatic conditions, this warranty does not cover changes in brass finish, rusting, 
pitting, tarnishing, corroding or peeling.  Brass finish fans maintain their beauty when protected from 
varying weather conditions.  Any glass provided with this fan is not covered by the warranty.

Any replacement of defective parts for the ceiling fan must be reported within the first year from the 
date of purchase.  For the balance of the warranty, call our customer service department (

at 

1-800-527-1292

)

 for return authorization and shipping instructions so that we may repair or replace 

the ceiling fan.  Any fan or parts returned improperly packaged is/are the sole responsibility of the 
purchaser.  There is no further express warranty.  Litex Industries disclaims any and all implied 
warranties.  The duration of any implied warranty which cannot be disclaimed is limited to the limited 
lifetime period as specified in our warranty.  Litex Industries shall not be liable for incidental, 
consequential or special damages arising at or in connection with product use or performance except 
as may otherwise be accorded by law.  This warranty gives you specific legal rights and you may 
also have other rights which vary from state to state.  This warranty supersedes all prior warranties.

Note:

  A small amount of "wobble" is normal and should not be considered a defect.

TROUBLESHOOTING

  PROBLEM 

          POSSIBLE CAUSE 

CORRECTIVE ACTION

 

4. Wires in light kit fitter (E) not 

4. Check wires in light kit fitter (E)

 wired 

correctly.

 and, 

if 

necessary, re-wire

 

 

according to instructions on

  

page 

11.

 

5. Light kit is lamped with more  

5. Lamp light kit with bulbs that

 

than the allowable 190W, causing 

total no more than 190W.

 

the wattage limiting device to in-

 

terrupt the flow of electricity to the

 light 

kit.

WARRANTY

Summary of Contents for CHESHIRE II


















Reviews: