13
INSTALLING FAN WITHOUT INCLUDED LIGHT KIT (OPTIONAL)
If you do NOT wish to use the light kit,
remove
three screws from switch housing plate. (Fig. 1)
1
1.
2
2.
A
Align holes in extra switch housing (L) with holes in
switch housing plate. (
Note:
The wide gap in the top
edge of the extra switch housing (L) should align with
the reverse switch on the switch housing plate for the
proper fit.) Re-insert screws that were previously
removed. Use a Phillips screwdriver to secure all
screws. (Fig. 2)
Switch
Housing
Plate
L
Switch
Housing
Plate
A
3
3. The pull chain extension (J) supplied in one of the
hardware packs or custom pull chain extension (sold
separately) may be attached to fan. (Fig. 3)
J
The pull chain on the switch housing plate has four
positions to control
fan
speed. One pull is HIGH, two
is MEDIUM, three is LOW and four turns the fan OFF.
(Fig. 1)
1
1.
OPERATION INSTRUCTIONS
