Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
(39)
Check the damage
3
(punctures or fractures) on the tire
surface visually. As surface damage may impede driving
stability, such tires should be replaced.
B
WARNING
Replace a tire when worn to the specified limit, or if
find damage such as cuts or cracks.
Tire specification
When replacing a tire, make sure the new tire condition
is same as described in this manual.
Tires with
different specifications may affect driving stability of the
motorcycle.
B
WARNING
Tire standard applicable to the motorcycle:
Front wheel:
90/90-10 50J
Rear wheel:
90/90-10 50J
B
WARNING
Using tires other than the standard tires might
create problems. We sincerely recommend you to
select standard tires.
LIGHT AND SIGNAL
The check of lighting and signal consult the content of the
“inspection before riding” section.
Replacement of bulbs
The rated power of each bulb is shown in the latter content
of “specifications”. When replacing a burnt out bulb, be
sure to use the bulb with the same rated power and
specification.
If using a different bulb, it might cause
overload of the electric system and early breakdown of
the bulb.
B
CAUTION
Failure to use a light bulb with the correct wattage
rating can overload the electrical system of your
motorcycle or cause the bulb to burn out sooner.
B
CAUTION
Please go to an authorized service station to
replace the bulb.
B
CAUTION
Must keep the bulb clear, otherwise the bulb will
destroys early. When replacing the bulb, clear the
grease on the bulb.
Location of bulbs
38
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
(39)
