Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
(31)
NGK
Remarks
CR5HSA
If the standard spark plug is apt to get wet,
replace with this plug.
CR6HSA Standard.
CR7HSA
If the standard spark plug is apt to overheat,
replace with this plug.
NOTE: This motorcycle uses a resistor-type spark plug
to avoid jamming electronic parts.
Improper spark
plug selection may cause electronic interference with
your motorcycle’s ignition system, resulting in motorcycle
performance problems. Use only the recommended spark
plug.
Spark plug removal
1. Remove the toe cushion.
2. Remove the screw
1
and engine hood
2
.
3. Remove the bracket by unscrew the bolts
3
.
4. Remove the spark plug cap
4
.
5. Remove the spark plug with the spark plug wrench.
Spark plug installation
B
CAUTION
A cross-threaded or over-tightened spark plug will
damage the aluminum threads of the cylinder head.
When dismantling the spark plug, keep debris from
entering the engine via the spark plug hole.
Follow the procedure below to tighten the spark plug
properly.
Carefully turn the spark plug by hand into the threads until
it is finger tight. If the spark plug is new, tighten it with a
wrench about 1/2 turn past finger tight. If you are reusing
the old spark plug, tighten it with a wrench about 1/8 turn
past finger tight.
NOTE: Insert the plug cap completely.
30
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
(31)
