(30)
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
4. Drain all the waste liquid in the oil collecting pipe
2
.
5. Reinstall the oil collecting pipe plug
4
and fasten the
clamp
3
.
6. Reinstall the oil collecting pipe
2
with the clip
1
.
NOTE: Be true that reinstall the collecting pipe plug.
NOTE: When air is very humid, properly increase the
inspection frequency.
Rear lower oil collecting pipe
1. Loosen the clamp(s)
2
.
2. Remove the oil collecting pipe(s)
1
together with the clamp(s)
2
.
3. Drain all the waste liquid in the
oil collecting pipe(s)
1
.
4. Reinstall the oil collecting pipe(s)
1
and fasten the
clamp(s)
2
.
NOTE: Be true that reinstall the collecting pipe.
NOTE: When air is very humid, properly increase the
inspection frequency.
SPARK PLUG
Spark plug inspection
0.6–0.7mm
Measure the spark plug gap with a thickness gauge. The
standard spark plug gap is 0.6–0.7mm. If the measured
spark plug gap is out of standard range, adjust or replace
it with a new one.
Whenever removing carbon deposits, be sure to observe
the operational color of the spark plug’s porcelain tip. This
color tells you whether or not the standard spark plug is
suitable for your type usage. A normal operating spark
plug should be very light brown in color. If the spark plug is
very white or glazed in appearance, it has been operating
much too hot. This spark plug should be replaced with a
colder plug.
Spark plug replacement guide
B
CAUTION
An improper spark plug may have an incorrect fit or
heat range for your engine. This may cause severe
engine damage.
B
CAUTION
Use one spark plug listed below or equivalent.
Consult your Haojue dealer or a qualified mechanic
if you are not sure which spark plug is correct for
your type of usage.
(30)
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
29
