(16)
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
NOTE: Dispose of waste engine oil properly to avoid
environmental contamination. We suggest you to collect
the waste oil in a sealed container and take it to a nearby
recycling facility. Do not place it into a trash bin and do not
pour it on the ground.
GEAR OIL
Please use “Haojue motorcycle gear oil”.
If there be
unavailable, gear oil API GL-5 with viscosity of SAE 80W-
90 or SAE 85W-90 can be used as a substitute.
NOTE: Dispose of waste engine oil and gear oil properly
to avoid environmental contamination. We suggest you to
collect the waste oil in a sealed container and take it to a
nearby recycling facility. Do not place it into a trash bin
and do not pour it on the ground.
BREAK-IN
Correctly breaking in the motorcycle can improve its life,
and at the same time fully bring out the performance
of motorcycle. The following guidelines explain proper
break-in procedures:
RECOMMENDED THROTTLE LIMIT
Throttle opening must not reach maximum during the new
motorcycle brake-in period; it is suggested to be less than
3/4 of the maximum, while snap-acceleration must be
avoided while riding.
VARY ENGINE SPEED
The engine speed should be changed frequently instead
of being kept in a constant speed. During the break-in
period, proper acceleration will ensure a complete break-
in. However, do not exceed the recommended throttle
opening limit.
BREAKING IN THE NEW TIRES
New tires need proper break-in to assure maximum
performance, just as the engine does.
Wear in the
tread surface by gradually increasing your cornering lean
angles over the first 160 km before attempting maximum
performance. Avoid hard acceleration, hard cornering,
and hard braking for the first 160 km.
(16)
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
15