(34)
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
B
CAUTION
Carefully inspect whether the engine parts that
have been dismantled and installed again suffer
any oil leakage.
B
CAUTION
It is suggested to replace the seal rings when the
engine oil strainer is replaced.
CARBURETOR
Stable carbureting evaporation is the most fundamental
requirement for the carburetor.
The carbureting
evaporation has been accurately set in the factory. Please
do not change its setup. You only need to pay attention to
two things: idle and throttle cable free-play.
Adjustment of idle speed
1. Start the engine, keep it running at idle till fully pre-
heated.
2. After the engine has been pre-heated, release the
throttle, open saddle, remove the small cap, turn the
adjusting screw to right and left to keep the engine
revolving speed between 1600–1800 rpm.
B
CAUTION
Adjustment the engine idle speed should be done
when the engine has been fully pre-heated.
0.5–1.0mm
THROTTLE CABLE PLAY
1. Remove
the
rubber
bush(s)
along the throttle cable.
2. Loosen lock nut
1
.
3. Turn the adjuster
2
so that
the throttle cable has 0.5–1.0mm
play.
4. Tighten the lock nut
1
.
5. Reinstall the rubber bush(s).
B
WARNING
Inadequate throttle cable play can cause engine
speed to rise suddenly when you turn the
handlebar. This can lead to loss of rider control.
Adjust the throttle cable play so that engine idle
speed does not rise due to handlebar movement.
FUEL EVAPORATION POLLUTANT SYSTEM
This motorcycle is provided with a set of system to prevent
the fuel evaporating into the atmosphere. It is required to
(34)
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
33
