![background image](http://html1.mh-extra.com/html/haojue/hj100t-7c-2016/hj100t-7c-2016_user-manual_3732746030.webp)
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
(29)
The air filter inside the air cleaner, the air cleaner is close
to the left side of the rear wheel. Use the follow procedure
to remove the air filter and check it.
1. Remove the screw
1
, remove the rear cover
2
,
remove the screw
3
, then remove the screw
4
inside
the rear cover, remove the nearside rear cover
5
at
last.
2. Loose the bolt
6
, then disassemble the intake air pipe
7
, and pull it out.
3. Blow the pressed air into the entry, clean the intake air
pipe
5
.
4. Remove the screws
8
, then remove the air cleaner
cover
9
.
5. Remove the screws
:
and screw
;
, remove the air
filter
<
. The air filter is made by paper.
Dispose (clean) the filter
1. Check the filter, or replace it,
don’t need to clean the filter.
2. Clean the dust on the air filter
shell and that on the air filter
cover inner wall.
3. Reinstall the cleaned filter or new filter in reverse order
of removal. Be absolutely sure that the filter is securely
in position and is sealing properly.
B
CAUTION
If riding in dusty conditions, make the inspection
and replacement intervals for the air filter element
shorter; if it is found that the air filter element
is
blocked,
damaged
or
non-dustproof,
the
engine power has dramatically declined or the
fuel consumption has increased, do not solve
the problem during the next maintenance but
immediately change the air filter element. If the
engine is started when there is no air filter element,
it will wear more seriously. Check the condition
of the air filter element frequently because this
component usually has an impact on engine life.
OIL COLLECTING PIPES
After the air filter is inspected, inspect the oil collection of
the oil collecting pipes at its lower part. If there is liquid in
the oil collecting pipes, drain it promptly with the method
below.
Front lower oil collecting pipe
1. Remove the collecting pipe
2
from the clip
1
.
2. Loosen the clamp
3
, and move
it upward.
3. Remove the collecting pipe plug
4
from the oil collecting pipe
2
.
28
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
(29)