Hanyoung TH500 Manual Download | Manualshive

Page: 7 / 99

background image

8

· It has many combustible objects
· It has dusts and salinity

•The case of this controller is chrome-zinc plating and Bezel is made by ABS/PC

anti-combustion material but please not install it to the inflammable place.
Especially please do not put it on the inflammable products.

• Please keep it away from the machine or wires that can be cause of noise.

Especially, please have enough warn-up when you operate it under 10 Ω temperature.

•Please install it on horizontally
• Please follow Safety Information to prevent any fire, electric shock and any damage.
• Please follow this manual for install and operation of this controller.
• Please do not turn on power until you install all of parts
• The grade of over voltage is CatalogueII and using environment is DegreeII

1.3 Quality guarantee

• Unless it is included company's conditions for warrantee, we are not responsible

for any warranties or guarantees.

• We are not responsible for any damages and indirect loss of the use or third

person due to unpredicted natural disasters.

• The warranty for this product is valid for 1 year from purchase, and we will fix any

breakdowns and faults from proper uses as it is mentioned in this manual for free.

• After the warranty period, repair will be charged according to our standard policies.
• Under following conditions, repair will be charged even during warranty period.

•Breakdowns due to user's misuses
•Breakdowns due to natural disasters
•Breakdowns due to moving the product after installation.
•Breakdowns due to modification of the product
•Breakdowns due to power troubles

• Please call our customer service for

A/S

due to breakdowns.

th300_500_통합본_th300_500_통합본.qxp 19. 6. 26. 오후 1:33 페이지 8

«
...
5
6
7
8
9
...
»

Summary of Contents for TH500




































































































Reviews:

No comments

Related manuals for TH500

Brand: Aalborg Pages: 48

Brand: Greenheck Pages: 4

Brand: Vector Pages: 8

Brand: Vent-Axia Pages: 4

RSF-B mini Series

Brand: Harmonic Drive Pages: 32

Brand: ccei Pages: 16

Brand: L&L KILNS Pages: 12

External Joystick

Brand: Quickie Pages: 4

Push-To-Set PTS-CVR

Brand: Ohio Medical Pages: 25

Brand: Grifco Pages: 20

ISaGRAF mPAC Series

Brand: ICP DAS USA Pages: 75

Brand: Bamo Pages: 10

Brand: dixell Pages: 4

Brand: Samson Pages: 20

Brand: Viking Pages: 24

Brand: National Instruments Pages: 18

Brand: EFI Pages: 129

Brand: Allen-Bradley Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands