background image

Technical instructions

MPNT0255 v1.1 (10/03/2015)

MPZ

smart controller for

piezoelectric switch

Reference: SF10M070 / PF10M070

Table of Contents

1.  Packaged  content  ...................................................................................................................  2
2.  Technical  features  
.................................................................................................................   2
3.  Description  ............................................................................................................................   3

3.1. Presentation of the MPZ ............................................................................................  3
3.2. Description of components .........................................................................................  4

4.  Installation  .............................................................................................................................  5

4.1. Integration in a fuse box ............................................................................................  5
4.2. Electrical  connection  
..................................................................................................  5

5.  Configuration  ........................................................................................................................   7

5.1. Piezoelectric RGB markers ......................................................................................... 8
5.2.  Mode  of  operation  ....................................................................................................   10
5.3.  Time  out  ...................................................................................................................  11

6.  Operation  .............................................................................................................................  12

6.1.  Start-up  .....................................................................................................................  12
6.2.  Use
  ...........................................................................................................................   12
6.3. RGB LED command ................................................................................................  13
6.4. Multi-function module indicator ...............................................................................  15

A. Declaration of Conformity ...............................................................................................  16

Read all of this leaflet carefully before installing, operating or using this prod-
uct.

Summary of Contents for MPZ

















Reviews: