76
Explanation
In case of Power ON -
Always ON regardless of operation condition
In case of Power ON – ON during operation
In case of D.I input, it is the button for setting System Reset(END).
Only if you press this button, the D.I waiting time will be valid.
On the status of System RESET touched,
it resets (END) the system after passing D.I waiting time.
D.I Input
status
ACT
W.Time
The D.O configuration setting refers to the screen for assigning the various signals within the system
to RELAY output and O.C output. Here, the signals assigned and connected are displayed through
the actual terminal. The D.O assignment is allowed to be redundant except special cases, so it is
necessary to assign and enter the RELAY and O.C carefully.
When outputboard-3 is used in TH500, Relay13 ~ Relay20 can be assigned through O/C1 ~ O/C8.
(Example: if Relay15 is desired to be used, please set O/C3 for Relay15.)
6.7 D.O Configuration Setting
Setting item
[FIG.112] D.O Configuration Setting 1(Inner Signal)
The D.O configuration setting 1, 2 [Fig. 112, 113] refers to the screen that assigns Inner Signal and
Time Signal to RELAY output and O.C output respectively.
6.7.1 D.O Configuration Setting 1
(Output allocation about the innersignal)
th300_500_통합본_th300_500_통합본.qxp 19. 6. 26. 오후 1:35 페이지 76
