55
Date/Time Reserve RUN setup [Fig.68] will be shown when pressing
After entering (Year,Month,Date,Hour,Minute) into the indication screen of [Current Time] and
pressing
value, Date and Time will be set up. RUN(Operation) method by means of
Reservation Time Setting is same as Current Time Setting method. After Reservation Time
Setting and move to the Running screen of fixed control[Fig.69], screen will be on
and off and shown. If reservation time comes, it turns into RUN status. In order to cancel
, please press flickering "Reservation Waiting" and select
.
[Fig.68] Reservation time setting screen
[Fig.69] Fixed control the 1st working stop screen
5.3 Date/Time Reservation Setting
•Keep in mind that it is impossible to recover the original contents of the target
after copying the pattern/segment. Once you press the
button,
the original contents of the source cannot be recovered again. After copying
pattern by using
button, you should make sure that the related
parameter is proper setting. (Repeat, Connect, Waiting, Alarm, Start mode,
ect)
•If you begin to work by pressing
button during reservation waiting, reservation
waiting will be canceled automatically and the operation will start. Likewise, if you
start the 『RUN/STOP』 operation through Contact input(D.I), reservation waiting will
be canceled automatically
YES
th300_500_통합본_th300_500_통합본.qxp 19. 6. 26. 오후 1:35 페이지 55