8_
installation
installation
Please take note of the followings before using this product.
●
Do not use the product outdoor.
●
Do not spill water or liquid in the connection part of the product.
●
Do not impose the system to excessive shock or force.
●
Do not pull out the power cord forcefully.
●
Do not disassemble the product on your own.
●
Do not exceed the rated input/output range.
●
Use a certified power cord only.
●
For the product with an input ground, use a grounded power plug.
mOUNTINg ThE mUlTI ADApTER
You can mount the decoder on the monitor’s VESA holes or a pole by using a multi adapter.
The multi adapter supports the following VESA standards.
100 x 100 mm (outside)
75 x 75 mm (inside)
mounting on the monitor's VESA holes
1.
Fix the multi adapter to the monitor by using four M4 L8 screws.
￭
Confirm the VESA standard of the monitor on which you intend to mount the multi adapter.
2.
Fasten two M3 L6 screws to the base of the decoder.
3.
Make sure the screws on the base of the decoder go into the threaded holes of the multi adapter.
￭
Mount the decoder with the connecting terminal facing down.
4.
Press the decoder toward the monitor and then slide it down to fix it.
￭
Press the decoder until the multi adapter's metal spring is exposed and fix the decoder.
installation
Summary of Contents for Wisenet SPD-152
Page 1: ...NETWORKVIDEO DECODER User Manual SPD 152 ...
Page 66: ......
