Hanwha Techwin Wisenet SPD-152, Manual

Page: 35 / 66

English
_35
•
SE
TU
p
setup
•
SE
TU
p
Network Camera firmware Upgrade
●
Channel: Displays channel information.
●
Model: Displays the camera model information.
●
Current version: Displays the current camera firmware version.
●
Upgrade version: Displays the firmware version to upgrade.
– Press the < > button to select the firmware manually within the USB.
– < > indicates an upgrade via a remote server.
●
Status: Displays the status of the ongoing upgrade (upgrading, successful, failed).
1.
Click <
Upgrade
> in the <
Channel setup
> field.
2. Displays the upgradeable channel list among the connected cameras.
￭
If newer firmware exists on the remote server, the upgrade version is displayed, and the check box is automatically selected.
￭
If you do not see the upgrade version, you can press the < > button to get the upgrade version information from the server.
￭
Connect the USB with the camera firmware to a decoder and click < > to search and select firmware files from the USB.
￭
Select a channel and press the <
Apply to other channels
> button to apply the firmware to other channels connected to the same model at once.
3.
Check the box of the channel you want to upgrade.
4. Click the < Upgrade > button. The camera firmware upgrade starts.
￭
You can move to another menu while upgrading.
￭
Click < Stop > during an upgrade to stop upgrading.
￭
When the upgrade is completed, you can see the result in the popup window.
￭
Firmware upgrade is available only for channels connected with the Wisenet protocol and the camera’s administrator account.
￭
If the upgrade version is not displayed even though the camera’s firmware is out of date, check the network settings.
￭
If there are more than 50 firmware files in the top USB folder, the file may not be scanned.
￭
Disconnecting the USB from the decoder during an upgrade over the USB may cause the system to reboot.
Camera setup
You can set the camera while viewing the live video of the selected camera.
Setup > Camera > Camera setup
￭
You can use this feature in the following cases:
1. A camera connected to Wisenet protocols.
2. A camera connected with admin permissions.
￭
For more details on camera setup, refer to the camera user manual.
Settings and operational spec vary depending on each camera.
￭
This function is not supported in some models.
SSDR
If there is a significant difference between the dark and the bright areas, increase the brightness of the dark areas
to maintain the level of brightness of the entire area.
The mode, level, and D-Range can be set up.
backlight
You can view both bright and dark areas.
The mode, WDR level, WDR black level, and WDR white level can be set up.
Exposure
You can adjust the exposure of your camera.
The brightness, shutter, SSNR, Sens-up, Iris/Lens, and AGC can be set up.
●
Brightness: Adjusts the brightness by setting the exposure value.
●
Shutter: Adjusts the brightness by controlling the camera shutter speed. If you select shutter, you can set
among the items below.
– Auto: Adjusts the brightness automatically, controlling the shutter speed of the camera.
– ESC (Electronic Shutter Control): Adjusts the brightness automatically, controlling the shutter speed
according to the surrounding brightness.
– Manual: Adjust the brightness by manually selecting the maximum/minimum shutter speed of the camera.
– Anti-flicker: Reduces the shaking of the video when the screen shakes occur due to different frequencies and
illumination. The shutter speed cannot be set when the anti-flicker frequency is selected.