manualshive.com logo in svg

Hanwha Techwin Wisenet SPD-152, Manual

Share
Download
Hanwha Techwin Wisenet SPD-152 Manual Download Page 55

English 

_55

•

  l

IVE
 VIE
WER

 

live viewer 

•

  l

IVE
 VIE
WER

 

ChECKINg ThE All CAmERA STATUS

You can check the status of all cameras connected to the decoder.

live Status

Click <   >. You can check the status and transmission information of the camera connected to each channel.

￭ 

To change the profile setup, click the <

Camera setup

> button. For details on how to set up the profile, refer to the "

Setup

 > 

Setting the Camera

 >

 

Profile setup

” page in the table of contents.

ChANgINg ThE pATTERN Of SplIT SCREEN

Click the <   > button and select the desired split screen.
The selected split screen is applied to the video window.

ChECKINg ThE CAmERA lIST

Displays the camera type, status, and name registered in the decoder.

live > list

Name

Function Description

Channel information

Displays channel information. (channel number, color indication on video window assignment).

Camera type

Displays a normal camera.

Camera status

Displays the camera error status. 

Camera name

Displays the name set for the camera.

￭ 

If a camera connection error occurs, it is disabled in the list.

￭ 

The camera status displays information changes according to the network connection status and settings.

￭ 

For multichannel cameras registered with the Wisenet protocol, the channel information will be displayed under the model name of the multichannel 
camera.

Summary of Contents for Wisenet SPD-152



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands