Hanwha Techwin Wisenet SPD-152, Manual

Page: 49 / 66

English
_49
•
SE
TU
p
setup
•
SE
TU
p
To upgrade the current software version
Setup > System > System management > product information
1.
Connect a device storing the software to be updated.
￭
It may take about 10 seconds to recognize the device.
￭
Upgradeable devices include USB memory and network device.
￭
If you want to upgrade it on the network, the product should be connected to an external network.
Upgrade via the proxy server may not be enabled due to the restricted access.
2. When the recognized device appears, select < Upgrade
>.
￭
If you connect a device in the upgrade menu window, you can press the < > button to search for available software.
￭
If there is an upgraded version on the network, a popup window will appear.
￭
< Upgrade > will be activated only when there is a higher version than the current software version.
3. Click < Ok > on the < Software upgrade > window.
￭
While upgrading, it shows the progress.
4. When the upgrading is done, it automatically restarts.
Do not turn the power off until it finishes restarting.
￭
Restart from the stage 2 if the " Upgrade failed " window appears. When you experience continued failure, consult the service center for
assistance.
managing setup information
You can set the operation mode to control the decoder. In addition, you can apply the same settings in use to
other decoders or initialize the product.
Setup > System > System management > Settings
●
Operation mode: If you have admin permissions, you can select operation mode to control a decoder.
– Standalone: Can control Live monitoring and the setting changes of the camera on a decoder.
You can only change admin account information and operation mode in the web viewer.
– WEB: Can only Live monitor the camera on the decoder, and requires the web viewer to change settings or
control.
●
Storage device: Display the connected storage device.
– Click <
> to see the storage device.
– If you click the < format >, the format confirmation window will appear. Click on the < Ok > button to format
the selected storage device.
●
Decoder
→
USB: Store the information set on the decoder to the storage device.
– If you select <
Export
> the confirmation window will appear. If you select <
Ok
> then the decoder
information will be stored as a file.
●
USB
→
Decoder: Apply the setup information stored in the storage device on a decoder.
– If you select the exclusion setting, you can import all information but the selected information.
– If you select <
Import
> then you can import setup information stored in the storage device. If you select
<
Ok
> then the imported information is applied to a decoder.
￭
The < Export > and < Import > settings can be used in the same software version only.
●
Factory default: You can reset the system settings to the settings at the time of purchase. However, logs won't
be reset. Anything selected under Exclusion Setting won't be part of the factory reset.
A confirmation pop-up will appear when you press the <
Reset > button. Select the < Ok > button to reset the
selected items.
￭
If you export the setup information, the setup information is stored as a file in a decoder folder of the storage device.
￭
If you want to import setup information, you must have a setup information file in a decoder folder of a storage device.