HanseLifter HIW-02 Series, Operating Instruction

Page: 35 / 427

Page 12 of 22
HIW / HTF-02 series any kind of reproduction, even in parts, is not permitted.
UK
Only use fixings that are specially suited to the corresponding floor type.
If there are any doubts, consult a specialist or ask the architectural firm that designed the floor, which fasteners
are suitable and if the floor is suitable for the forces arising.
Power supply
The HIW-02 series lift tables require a 400V / 16A power supply.
Make sure all the cables and lines are laid so they do not cause a tripping hazard or are inside the work area.
The warranty does not cover damage caused by external force or driving/walking over the lines.
Loading and stability
Align the load towards the centre
There are differences between the individual goods to be lifted to such as: shape, centre of gravity, packaging
etc. It is important that attention is paid to these differences during loading, so that the goods are always loaded
with the centre of gravity towards the middle (see Figure 3 Load centre of gravity).
The visual centre of gravity is not always the actual centre of gravity. Pay attention to instructions on the
packaging relating to the centre of gravity.
Figure 3 Load centre of gravity
Figure 4 Load distribution
Attention
The power supply lines must not be driven over or walked on. Under certain circumstances, this can cause
internal damage of the supply lines and become a significant source of danger for electrical accidents.