HanseLifter HIW-02 Series, Operating Instruction

Page: 32 / 427

Page 9 of 22
HIW / HTF-02 series any kind of reproduction, even in parts, is not permitted.
UK
•
In case of direct contact of oil with the eyes or mucous membranes, rinse with plenty of clean water and
consult a doctor immediately.
•
Do not inhale oil mist
•
Always transport oils in containers intended for this purpose. Never allow oils to enter ground water or
waste water.
•
Dispose of waste oils and oily waste according to regulations
•
Wear protective clothing such as gloves, goggles and apron when working with oils.
Personal protective equipment
Always wear the prescribed protective equipment when working with the lift table. Observe additional company
safety regulations, if required.
General description
The HIW / HTF-02 series lift tables are intended for stationary operation for the lifting and lowering of loads and
pallets. They are characterised by ease of use, safety and reliability.
Lifting is performed by a hydraulic pump which is powered by an electric motor. Power is supplied via a 400V /
16A socket. Operation takes place via a control panel, which is connected to the controls of the lift table through
electric cables. Operation can only be carried out when the equipment is switched on.