Page EN-41
Troubleshooting table
Problem
Possible cause
Solution
The indicator (2) is
illuminated although
dishwasher salt has
been added.
The dishwasher salt is
clumpy.
Stir the dishwasher salt using the
end of a spoon or similar.
The water is not
running or it is running
only very slowly.
There is a kink in the inlet
hose.
Arrange the inlet hose properly so
that it is not kinked (see “Connect
the inlet hose” on page EN-31).
The water tap is not properly
on.
Turn the water tap on completely.
The water is not
running off or only very
slowly.
The filters are blocked.
Clean the filters (see “Checking
and cleaning the filters” on
page EN-27).
The outlet hose is kinked,
has been extended or is
hanging too high up/too low.
Lay out the outlet hose in the
proper manner (see page EN-31).
The appliance is not
sealed.
The door seal is defective.
Have the door seal replaced (see
“Service” on page EN-44).
The outlet hose or the inlet
hose is defective.
Have the defective hose replaced
(see “Service” on page EN-44).
The appliance can be
switched on/off, but
cannot be operated.
The appliance can only be
operated when the door is
closed.
Close the door.
The appliance cannot
be operated.
The buttons are locked.
Unlock the buttons (see “Button
lock/Child lock” on page EN-25).
