Page EN-39
Installation, connection and initial commissioning
°dH
Setting
Regeneration process
all X Programme
sequences
0–5
H1
–
6–11
H2
10
12–17
H3
5
18–22
H4
3
23–34
H5
2
35–55
H6
1
Example ECO programme: with a water
hardness level of H3 and under laboratory
conditions, the duration of the programme in-
creases by 4 minutes. The energy consump-
tion increases by 0.02 kWh and the water
consumption by 2.0 litres.
Test run
It is recommended that you carry out a test
run before the first dishwasher cycle in order
to remove residues from the manufacturing
process and in order to ensure that the appli-
ance functions perfectly.
If no water escapes during the test run and if
there are no unusual noises, the appliance is
ready to use.
• Carry out this test run when the dishwash-
er is empty and without any dishwasher
detergent. See chapter ”Dishwasher op-
eration” from page EN-21 for the proce-
dure.
