Page EN-34
Installation, connection and initial commissioning
(32)
5. In order to compensate for uneven floor
surfaces and set up the dishwasher hori-
zontally, you can screw the four adjusta-
ble feet (32) in or out. The adjustable feet
have slots around their circumference.
Insert a screwdriver and turn the adjust-
able foot.
Use a spirit level to set up the dishwasher.
Installation
NOTICE
Risk of damage to property!
Selecting the wrong screws can dam-
age the worktop.
■
Use the screws which are supplied in
the delivery or screws of an appropri-
ate length.
• Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
• Maintain sufficient distance from the walls
and adjacent appliances. The measure-
ments of the recess must at least corre-
spond to the details in the diagram above.
Preparing the appliance
1. Switch the fuse off.
2. Remove cardboard, polystyrene and ad-
hesive strips from the inside, if you have
not already done so.
(37)
3. Affix the enclosed condensation protec-
tion film (37) to the underside of the work-
top. In this way, you will avoid damage to
the worktop as a result of hot steam which
may be emitted from the dishwasher if the
dishwasher door is left open.
(40)
4. Insert the two mounting brackets (40) into
the front slots on the top of the appliance
so that you can screw the appliance to the
worktop later on.
