manualshive.com logo in svg

Hanna Instruments HI84531, Instruction Manual, Page: 38 / 52

Share
Download
Hanna Instruments HI84531 Instruction Manual Download Page 38

38

TIT

rA

TION

 Pr

OCEDU

rE

• The titration curve can be visualized during a titration by pressing 

Plot ON

. Press 

Plot OFF

 or 

ESC

 

to exit this mode.

• At the end of the titration, the total or strong alkalinity of water sample in the selected unit of 

measurement (mg/L or meq/L) is displayed. The titration curve can be viewed by pressing 

Plot ON

. 

Press 

Plot OFF

 or 

ESC

 to exit this mode.

   

• Press 

LOG

 to record the concentration value into the instrument’s memory. A message will be 

displayed for a few seconds indicating the amount of the free log space. Up to 200 log samples can 
be recorded in the instrument’s memory.

• Press 

Restart

 to begin a new titration or 

ESC

 to return to the titration menu.

• If the concentration exceeds the range limits, the exceeded range limit will be displayed blinking. 

Another titration can be started by pressing 

Restart

.

• “Wrong input” error message appears when the input reading (pH, temperature) exceeds the 

specified limits. The pH or temperature value and concentration will blink indicating an error.

Summary of Contents for HI84531





















































Reviews:

No comments