manualshive.com logo in svg

Hanna Instruments HI84531, Instruction Manual, Page: 22 / 52

Share
Download
Hanna Instruments HI84531 Instruction Manual Download Page 22

22

GUIDE

 TO

 D

ISPLA

y C

ODES

8.3.  TITRATION MESSAGES

This screen is displayed when the instrument is in titration 
mode. Press 

Start

 to begin a titration, 

Meter

 to enter pH 

meter mode or 

Prime

 to enter into the prime function.

The titration result, expressed in mg/L or meq/L as CaCO

3

, 

is displayed automatically at the end of the titration. Press 

Restart

 to start another titration or 

ESC

 to return to the main 

screen.

This error message appears when the input reading (pH 
or temperature) exceeds the specified limits. The pH or 
temperature value and the concentration will blink indicating 
an error.

This screen appears when the sample concentration is out 
of range.

This screen appears when the stirrer is not working properly. 
Check the stir bar and beaker content. 
Press 

Restart

 to try again.

This error message appears when the pump is not working 
properly. Check the tubing, valve and syringe. 
Press 

Restart

 to try again.

Summary of Contents for HI84531





















































Reviews:

No comments