manualshive.com logo in svg

Hanna Instruments HI84531, Instruction Manual, Page: 14 / 52

Share
Download
Hanna Instruments HI84531 Instruction Manual Download Page 14

14

SETUP

 mENU

7.  SETUP MENU

The titrator’s setup menu may be accessed from the main screen (meter or titrator) by pressing the 

MENU

 key, then 

Setup

.

A list of setup parameters will be displayed with currently configured setting.
While in the setup menu, it is possible to modify the instrument’s operation parameters. The 

ARROW

 

keys permit the user to scroll the setup parameters. 
Press 

HELP

 to view the contextual help.

Press 

ESC

 to return to the main screen.

Concentration Unit

mg/L or meq/L

Press the corresponding virtual option key to change the option.

Measurement Range

LR or HR

Use the table below to determine the appropriate range. Press the corresponding virtual option key 
to change the option.

Note:

 Different titrant solutions are required for each range.

Alkalinity Type

Strong or Total

Use the table below to determine the appropriate range.
Press the corresponding virtual option key to change the option.

Summary of Contents for HI84531





















































Reviews:

No comments