manualshive.com logo in svg

Hanna Instruments HI84531, Instruction Manual, Page: 16 / 52

Share
Download
Hanna Instruments HI84531 Instruction Manual Download Page 16

16

SETUP

 mENU

Time

Press the 

Modify

 key to change the time format.

Press 

Format

 to switch between 12 hour (am/pm) and 24 hour mode.

Press 

 to highlight the value to be modified. Use the 

ARROW

 keys to change the value. Press 

Accept

 to confirm the new value or 

ESC

 to return to the setup.

   

Date

Press the 

Modify

 key to change the date format.

Press 

Format

 to cycle between the available date formats.

Press 

 to highlight the value to be modified. Use the 

ARROW

 keys to change the value. Press 

Accept

 to confirm the new value or 

ESC

 to return to the setup.

   

Key Beep

Select 

Enable

 to activate or 

Disable

 to deactivate the Key Beep function.

If enabled, a short beep will be heard every time a key is pressed.

Error Beep

Select 

Enable

 to activate or 

Disable

 to deactivate the Error Beep function.

If enabled, a beep will be heard when an error condition occurs.

Summary of Contents for HI84531





















































Reviews:

No comments