manualshive.com logo in svg

Hanna Instruments HI 903, Quick Start Manual

Share
Download
Hanna Instruments HI 903 Quick Start Manual Download Page 59

4-9

GENERAL OPTIONS

4.10

Restore Files from USB Storage Device

This screen allows the user to transfer files from the USB storage device to the titrator.
Insert the USB Storage Device into the USB port on the left side of the titrator.

The file types that can be transferred are:

Standard Method Files

- HIxxxxyy.MTD 

(e.g.: HI8001EN.MTD, HI8101EN.MTD)

User Method Files

- USERxxxx.MTD 

(e.g.: USER0001.MTD)

Drift/Titration Report Files

- DR_xxxxx.RPT, KF_xxxxx.RPT

(e.g.: DR_00001.RPT, KF_00001.RPT)

Use the 

 and 

 keys to select the file type.

Use the 

 and 

keys to scroll through the list.

The number of files and the name of each file found on the USB storage device is displayed
on the screen.
The option keys allow the following operations:

Returns to the 

General Options

 screen.

Copies the highlighted file from the USB storage device to titrator.

Copies all currently displayed files from the USB storage device to
titrator.

Deletes the highlighted file from the USB storage device.

Deletes all currently displayed files from the USB storage device.

Note:

In order to restore files from USB Key, please ensure that the methods and/or reports

you wish to transfer to the titrator are in the correct folder:

- Methods: USB: \ Drive \ HI 903 \ Methods \ *.mtd
- Reports: USB: \ Drive \ HI 903 \ Reports \ *.rpt

Summary of Contents for HI 903





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands