manualshive.com logo in svg

Hanna Instruments HI 903, Quick Start Manual

Share
Download
Hanna Instruments HI 903 Quick Start Manual Download Page 28

2-4

SETUP

10 Waste Bottle Assembly ............................................. 1 pcs.

•  Bottle Cap
•  Desiccant
•  Desiccant Cartridge
•  Fittings, O-rings
•  Tubes (Silicon and Teflon Tubing)

11 Calibration Key ........................................................ 1 pcs.
12 Power Cable ............................................................ 1 pcs.
13 USB Cable ............................................................... 1 pcs.
14 Instruction Manual Binder ......................................... 1 pcs.
15 USB Storage Device ................................................. 1 pcs.
16 HI 900 PC Application (Install Kit on USB Stick) ......... 1 pcs.
17 Quality Certificate .................................................... 1 pcs.
18 ISO 8655 Burette Compliance Report ........................ 1 pcs.
19 Karl Fischer Dual Platinum Pin Electrode .................... 1 pcs.

See

Appendix 3 

section

 A 3 Titrator components

 for pictures.

If any of the items are missing or damaged, please contact your sales representative.

Note:

 Save all packing materials until you are sure that the instrument functions correctly.

Any damaged or defective items must be returned in their original packing materials
together with the supplied accessories.

2.2

Safety Measures

The following safety measures must be followed:

1. Always ensure that the power-supply cable is connected to a grounded main power plug.

2. Never connect or disconnect the pump assembly with the titrator turned on.

3. Verify that the burette and the attached tubing are assembled correctly (see 

Section 8.1

Burette Maintenance for more details).

4. Always check that the titrant, solvent, waste bottles and the titration beaker are properly

assembled.

5. Always wipe up spills and splashes immediately.

Summary of Contents for HI 903





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands