manualshive.com logo in svg

Hanna Instruments HI 903, Quick Start Manual

Share
Download
Hanna Instruments HI 903 Quick Start Manual Download Page 128

8-12

MAINTENANCE, PERIPHERALS

8.4.3

Connecting a Printer

A variety of parallel printers can be connected to the parallel port of the titrator using a
standard DB25–pin cable.

Warning:

The titrator and the external printer must both be OFF before they are connected.

Connect the external printer to the standard 25–pin Socket.
Turn on the titrator and then the printer.

8.4.4

Connecting to a Computer

The titrator can be connected to a computer using a USB cable. HI 900 PC application needs
to be installed on the PC.
Connect the cable to the USB port on the rear panel of the titrator.

Connect the cable to the USB port on the PC.

Select the 

USB Link with PC

 screen on the titrator by following the path:

General Options - USB Link with PC

Launch the HI 900 PC application and then select the appropriate USB port on the PC.

The HI 900 PC application allows the transfer of files  (methods and reports) between titrator
and PC.

Summary of Contents for HI 903





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands