Hanna Instruments HI 903 Quick Start Manual Download Page 115

Page: 115 / 220

7-9

AUXILIARY FUNCTIONS

Company Name: Allows the company name to be recorded in each report.

Operator Name

Allows the operator name to be recorded in each report.

Electrode Name

Allows the electrode name to be recorded in each report.

Fields 1, 2, 3

Allows any additional information to be recorded in each report.

The fields must be selected from the

Setup Titration Report

screen (

see Section 7.4.5,

Setup Titration Report) in order to be displayed in the titration report.

7.4.4

Meter Information

Displays titrator configuration data.

Titrator Serial Number:

The serial number of the titrator base board.

Analog Board Serial Number:

The serial number of the titrator analog board.

Dosing Pump Serial Number:

The serial number of the connected pump.

Titrator Software Version:

The current software version installed on the titrator.

Base Board Software Version:

The current software version present on the base board

of the titrator.

Dosing Pump Software Version:

The current software version for the pump.

Analog Calibration Date:

Manufacturer calibration date of analog board.

Note:

If more than 1 year elapsed from the calibration date of the analog board, the

message

Analog Calibration Due

will appear on the main screen and analog

board recalibration must be performed.

Summary of Contents for HI 903





























































































































































































































Search results

Summary of Contents for HI 903

Reviews:

Brands by name

Popular brands

Hanna Instruments HI 903, Quick Start Manual

Search results

Summary of Contents for HI 903

Reviews:

Brands by name

Popular brands