background image

WARRANTY

            

T

he manufacturer warrants the product manufactured by it, when properly installed, operated, applied, and maintained in accor-

dance with the procedures and recommendations outlined in the manufacturer’s instruction manuals, to be free from defects in material 

or workmanship for a period of one (1) year from the date of shipment from the manufacturer or the manufacturer’s authorized distributor, 

or eighteen months from the date of shipment from the factory, whichever occurs first, provided such defect is discovered and brought to 

the manufacturer’s attention the aforesaid warranty period.  The manufacturer will repair or replace any product or part determined to be 

defective by the manufacturer within the warranty period, provided such defect occurred in normal service and not as the result of misuse, 

abuse, neglect, or accident.

The warranty covers parts and labor for the warranty period.  Repair or replacement shall be made at the factory or the installation site, 

at the sole option of the manufacturer.  The manufacturer must first authorize any service performed on the product by anyone other than 

the manufacturer.  Normal maintenance items requiring routine replacement are not warranted.  Unauthorized service voids the warranty 

and any resulting charge or subsequent claim will not be paid.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WRITTEN, ORAL, OR STATUTORY, 

AND IS EXPRESSED IN LIEU OF THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS 

FOR A PARTICULAR PURPOSE.

  THE MANUFACTURER SHALL NOT BE LIABLE FOR LOSS OR DAMAGE BY REASON OF STRICT 

LIABILITY IN TORT OR ITS NEGLIGENCE IN WHATEVER MANNER INCLUDING DESIGN, MANUFACTURE, OR INSPECTION OF 

THE EQUIPMENT OR ITS FAILURE TO DISCOVER, REPORT, REPAIR, OR MODIFY LATENT DEFECTS INHERENT THEREIN.  THE 

MANUFACTURER, HIS REPRESENTATIVE OR DISTRIBUTOR SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR 

OTHER INCIDENTAL OR CONSEQUENTIAL COSTS, EXPENSES, OR DAMAGES INCURRED BY THE BUYER, WHETHER ARISING 

FROM BREACH OF WARRANTY, NEGLIGENCE OR STRICT LIABILITY IN TORT.

The manufacturer does not warranty any product, part, material, component, or accessory manufactured by others and sold or sup-

plied in connection with the sale of the manufacturer’s products. 

AUTHORIZATION FROM THE SERVICE DEPARTMENT IS NECESSARY BEFORE

MATERIAL IS RETURNED TO THE FACTORY OR IN-WARRANTY REPAIRS ARE MADE. 

SERVICE DEPARTMENT : (724) 746-1100

SPX Dehydration & Filtration

1000 Philadelphia Street
Canonsburg, PA 15317-1700 U.S.A.
Phone: 724-745-1555 • Fax: 724-745-6040
Email: [email protected]
www.hankisonintl.com

© 2008 SPX Dehydration & Filtration.   All rights reserved.

Summary of Contents for HBP Series













































Reviews: