38
For 80XENS, 100XENS, 80XEN, 100XEN, 120XEN and 140XEN:
Place two wooden blocks with the dimensions 150mm×100mm (W×H) under the two wheels on
the front/rear of the machine, and then drive the machine onto these two wooden blocks.
For 160XEN and 160XENS:
Place two wood blocks with the dimensions 150mm×120mm (W×H) under the two wheels on the
front/rear of the machine, and then drive the machine onto these two wooden blocks.
6. Switch the driving function to the platform lifting/lowering function and press the handle to lift
the platform for about 2m.
Result: The platform should stop moving and the tilt alarm should be sounded. “LL” will be
displayed on the platform and ground control panel.
7
、
Lower the platform, switch to driving function, remove the working platform, and then the
wooden blocks.
Test the anti
-
rollover device
When the platform is lifted, the anti
-
rollover device should be enabled
automatically. The anti
-
rollover device activates two limit switches to restrict the machine's travel.
When the platform is lifted to the position where the fork seat leaves the anti
-
rollover device
lever, if the anti
-
rollover device is not enabled, the alarm will be sounded and the machine
cannot be lifted or driven.
1. Lift the platform.
Result: When the platform is lifted to the position where the fork seat leaves the anti
-
rollover
device lever, the anti
-
rollover device should be enabled automatically.
2. Push the left/right anti
-
rollover plate hard.
Result: The anti
-
rollover plate cannot be turned inward.
3. Lower the platform.
Result: The anti
-
rollover device should retract automatically.
4. Place a wooden block with the dimensions 100mm×50mm×50mm (L×W×H) under the guard
plate of the anti
-
rollover device and then lift the platform.
Result: When the platform is lifted to the position where it is 2m off the ground, the alarm will be
sounded and the platform and ground control panels will display the digits “18”. The machine
