23
3.8 Danger of falling
The machine should be operated in strict accordance with the requirements of this
manual and the maintenance manual, or if there are stricter industrial or local
regulations, the latter shall prevail.
permission.
★
It will increase the platform weight or surface area or carrying load if the operator installs any
additional devices for placing tools or other materials on the platform and guardrail.
★
Do not place ladders or scaffolds against the platform or lean against any part of the machine.
★
Do not use the machine on moving or movable surfaces or vehicles. Ensure that all tires are in
good condition and the tire nuts are tightened.
★
Do not place or add any overhanging loads on any part of this machine.
★
Do not use the machine as a crane.
★
Do not use the platform to push other machines or objects.
★
Do not make platform contact or tie it to any adjacent objects.
★
Do not place the load outside the platform.
★
Do not use the platform controller to lower the platform if it is caught, stuck, or unmovable
because of other objects nearby. If it is intended to use the ground controller to lower the
platform, no operation should be taken before all personnel have left the platform.
When one or more tires are off the ground, evacuate all personnel and use a crane, forklift or
other suitable equipment to stabilize the machine before any operation.
Danger of falling
★
People on the platform must wear safety belts or use safety facilities that comply with
government regulations. Tie the lanyard to the tie
-
down point of the platform, only one person
should perform this operation at each tie
-
down point.
★
Do not sit, stand or climb on the platform guardrail. Stand on the platform floor firmly at all
times.
★
Do not get down from the platform when the platform is lifted.
