41
The driving and steering functions cannot be used through the ground control
panel.
7.3 Operate on the platform
★
Turn the key switch to the platform control position.
★
Pull out the "Emergency Stop" buttons on the platform and the ground and set them to the
“ON (Open)” position.
★
The operator must wear the safety belt as required and fasten it to the hook for the safety belt
on the platform.
Adjust the platform position
1. Press the lifting button and it will light up.
2. Press and hold the enable switch on the control handle.
3. Operate the handle based on the lifting/lowering icon on the control panel.
Steering
1. Press the driving and steering button and it will light up.
2. Hold the enable switch on the control handle.
3. Use the thumb rocker switch on the top of the control handle to turn the steering wheel.
Use the color direction arrows of the platform control handle to determine the
wheel turning direction.
Drive
1. Press the driving and steering button and it will light up.
2. Press and hold the enable switch on the control handle.
3. Speed up: Slowly operate the handle to make it deviate from the center position.
4. Slow down: Slowly loose the control handle to the center position.
5. Stop: Return the control handle to the center position or release the enable switch.
Use the color direction arrows on the platform control handle to determine the driving direction
of machine.
The driving speed of the machine is restricted when the platform is lifted up to two meters.
