34
Step 3
Route the antenna out through the tube in the fuselage.
Mount the radio switch in the side of the fuselage.
Step 4
Remove the covering to expose the holes for the
hatch hold-down screws. Slide a #4 washer onto
a 4-40 x 1/2” socket head screw. Cut a
1/4" (6mm) piece of tubing to slide onto the screw.
Attach the hatch using two of these screws.
Step 5
Position the canopy onto the canopy hatch. Trace around
the canopy and onto the hatch using a felt-tipped pen.
Section 9: Final Assembly
Summary of Contents for FuntanaX 100 ARF
Page 40: ...40 Notes ...
Page 41: ...41 Notes ...
