32
Note
: Remember to either trim material
from the cowl to attach the glow igniter,
or use a remote glow connection.
Step 5
Slide the cowling onto the fuselage. Temporarily install the
propeller and spinner backplate. Position the cowl so there
is 1/8" (3mm) gap between the backplate and the cowl.
Step 6
Use the cardstock from Step 1 to locate the
positions for the cowling screws. Drill the
locations using a 1/8" (3mm) drill bit.
Step 7
Make any cutouts in the cowling to clear items such
as the muffler, fueling valve, needle valve, etc.
Step 8
Locate four 4-40 x 1/2" socket head screws and four #4
washers. Slide the washers onto the screws, and then
cut a small 1/4" (6mm) piece of fuel tubing to slide onto
the screws. Attach the cowling using the four screws.
Section 8: Cowling Installation
Summary of Contents for FuntanaX 100 ARF
Page 40: ...40 Notes ...
Page 41: ...41 Notes ...
