Handspring Visor Visor Pro User Manual Download Page 190

Page: 190 / 268

Page 190

Communicating Using Your Handheld

5. Wait for the Beam Status dialog box to indicate that the transfer is

complete before you continue working on your handheld.

To beam an application:

1. Open the Applications Launcher.

2. Tap the Menu icon

3. Tap App, and then tap Beam.

4. Tap the application you want to transfer.

Note:

Some applications are copy-protected and cannot be
beamed. These are listed with a lock icon next to them.

5. Tap Beam.

6. When the Beam Status dialog box appears, point the IR port

directly at the IR port of the receiving handheld.

7. Wait for the Beam Status dialog box to indicate that the transfer is

complete before you continue working on your handheld.

To receive beamed information:

1. Turn on your handheld.

2. Point the IR port directly at the IR port of the transmitting

handheld to open the Beam Status dialog box.

3. When the Beam dialog box appears, select a category for the entry.

Tip:

If you do not select a category the entry is placed in the
Unfiled category.

4. Tap Yes.

Summary of Contents for Visor Visor Pro













































































































































































































































































Search results

Summary of Contents for Visor Visor Pro

Reviews:

Related manuals for Visor Visor Pro

Brands by name

Popular brands

Handspring Visor Visor Pro, User Manual

Search results

Summary of Contents for Visor Visor Pro

Reviews:

Related manuals for Visor Visor Pro

Brands by name

Popular brands