H&S GM 170 Operator'S Manual And Parts List Download Page 7 | Manualshive

Page: 7 / 86

background image

AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS

Serial Number

(Dealer’s Name)

(Signature of Pre-Delivery Inspector)

(Inspection Date)

DEALER DELIVERY CHECK LIST

This check list that follows is an important reminder of valuable information that should be passed on to the
customer at the time this machine is delivered.

Check off each item as you explain it to the customer.

This delivery check list, when properly filled out and signed assures the customer that the Pre-delivery
service was satisfactorily performed.

Explain to the customer that the pre-delivery inspection was made.

Explain to the customer all the safety precautions they must excercise when operating this
unit.

Explain to customer that regular lubrication is required for proper operation and long life of
machine. Show customer the Lubrication Chapter of the Operator’s Manual.

Explain to customer that drain plugs must be installed before operating of grinder- mixer.

Give the customer Operator’s Manual and make sure they read and understand all
operating and service instructions.

Record model and serial number on this page and page 50 of this Manual.

Have customer sign a completed “Warranty Registration,” and mail it promptly.

Date Delivered

Dealer’s Name

By

Signature of Original Buyer

Note: Warranty is not valid until warranty card is completed and returned to H & S Mfg. Co., Inc.

(Remove Dealer File Copy

At Perforation)

SWINGING INTAKE AUGER (SIA)(if applicable)

Guards, shields, and attaching hardware are in place and properly secured.

SIA lifting, locking and supporting mechanisms function correctly. Counter-balance spring and

brake are properly adjusted. See Adjustments Chapter of this manual.

Transport lock mechanism engages and disengages correctly. Safety locking clip is attached to

the transport bracket.

Hydraulic motor and speed control levers operate properly during operation.

-5-

H&S DEALER PRE-DELIVERY CHECK LIST(CONT.)

Decals are in place and legible.

Model Number

«
...
5
6
7
8
9
...
»

Summary of Contents for GM 170























































































Reviews:

No comments

Related manuals for GM 170

Brand: Garmin Pages: 12

Brand: Garmin Pages: 13

Brand: Tanaka Pages: 20

Brand: Tandem Pages: 80

Brand: Tanco Pages: 4

Brand: Yamaha Pages: 5

Brand: Yamaha Pages: 48

Brand: Yamaha Pages: 85

Brand: Yamaha Pages: 43

Brand: Yamaha Pages: 200

LED PowerBank 48

Brand: SHOWTEC Pages: 12

Brand: SAC Pages: 2

Evo TM/TSV2 Awning Wall Set

Brand: Zempire Pages: 2

Brand: GERATHERM Pages: 40

Brand: Stanton Pages: 13

MobilGate - 128c

Brand: SeaSoft Pages: 11

Brand: KUHN Pages: 112

Brand: stilum Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands