3. H
I
P
RO
CARD
READER
U
SER
G
UIDE
Here are further instructions how to use the different functions of your HiPro card reader.
3.1. C
ONNECTING
Y
OUR
H
I
P
RO
CARD
READER
To be able to take payments your HiPro card reader needs to be connected by inserting the
iPod Touch which has the POS app that works with it.
The first time you connect you have to register the HiPro card reader to your POS app. Please
follow the instructions from your POS app to connect and register. Each POS app does this
differently.
3.2. T
RANSACTIONS
Transactions are initiated by the POS app on your iPod Touch. Depending on your acquirer
and/or agreement with your POS app provider, the following features may be enabled.
3.2.1.
Chip & Pin
The HiPro card reader supports Chip & PIN cards. For Chip & PIN transactions use the EMV
chip reader (see #14 in section 1.2).
This is an example of what happens in a Chip & PIN transaction:
1. Transaction is initiated in the POS app on the iPod Touch
2. When message “INSERT CARD” appears, insert card in the EMV chip reader (see #14 in
section 1.2) with the chip facing up and towards the HiPro card reader
3. Enter PIN using the keypad and press
[OK button] (Use [Back button] to erase
and then use the keypad to re-enter pin if you make a mistake), or cancel by
pressing
[
Cancel button]
4. When message “REMOVE CARD” appears, remove the card from the EMV chip reader
The merchant is responsible for providing the customer with the receipt from the POS app.
3.2.2.
Chip & Signature
The HiPro card reader supports chip & signature cards. For chip & signature transactions use
the EMV chip reader (see #14 in section 1.2).
This is an example of what happens in a chip & signature transaction:
1. Transaction is initiated in the POS app on the iPod Touch
!
©2019 Handpoint
12
