manualshive.com logo in svg

Handicare Ibis 24, User Manual

Share
Download
Handicare Ibis 24 User Manual Download Page 38

Adjustment options 

 

38 

The adjustment of the angle of the leg-rests can be done as follows: 

•

 

Push the handle (B) forward.

 

•

 

The leg rest goes upwards.

 

•

 

Release the handle in the desired position.

 

 
If the leg support is too high, do the following: 

•

 

Push the handle (B) forward. 
Now the gas spring is unlocked. 

•

 

Push the leg-rest with a light pressure from your leg in the desired position and hold it 
in that position. 

•

 

Release the handle. 
In this position the leg-rest is fixed and you can allow your leg to rest. 

 
XXXXXX-010504050.nl.doc 

 

5.6

 

Adjusting the footplate 

See fig. 010506000. 
 
The following can be adjusted on the 
footplate: 
A

 

The angle. 

B

 

The depth. 

 
The footplate can also be folded up to ease 
transfer and positioning. 

 
XXXXXX-010506000.nl.doc 

 

5.6.1

 

Adjusting the angle of the 
footplate 

See fig. 010506010. 
 
The angle of the footplate can be adjusted 
with respect to the lower leg in steps of 5°. 
 
The angle of the footplate should be adjusted 
as follows: 

•

 

Loosen locking nut (A) with a large 
screwdriver. 

•

 

Then loosen the Allen bolt (B) on the inside 
of the footplate (C), with an Allen key with a 
key width of 6 mm, so far that the teeth of 
the hinge come completely free. Now the 
footplate can be freely adjusted. 

•

 

Adjust the desired angle of the footplate 
and push the hinge manually together 
again. 

•

 

Tighten the Allen bolt securely. 

A

B

010506000

C

A

B

010506010

XXXXXX-010506010.nl.doc 

Summary of Contents for Ibis 24





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands