Handicare Ibis 24 User Manual Download Page 10

Page: 10 / 52

Preface

Pictograms

The following pictograms are used in this manual:

XXXXXX-010004020-en.doc

Caution

Procedures that can result - if they are not executed properly - in damage
to the product, the environment, or human injury.

PICDOC-010004110-en.doc

Attention!

Suggestions and advice for conducting the relevant tasks or activities
more easily.

PICDOC-010004120-en.doc

Available documentation

The following technical documentation is available for this wheelchair:

•

Owner's manual

•

Service manual.

XXXXXX-010005000-en.doc

Service and technical support

For information concerning specific settings, maintenance or repair work please contact
your dealer. He is always prepared to help you.
Ensure you have at hand:

•

Model

•

Manufacture year

•

Identification number

This information can be found on the identification plate.
See 'Identification of the product'.

XXXXXX-010006000-en.doc

Summary of Contents for Ibis 24





















































Search results

Summary of Contents for Ibis 24

Reviews:

Brands by name

Popular brands

Handicare Ibis 24, User Manual

Search results

Summary of Contents for Ibis 24

Reviews:

Brands by name

Popular brands