handi quilter Pro-Stitcher QM30010-2, User Manual

Page: 48 / 139

www.HandiQuilter.com Overview | 4.5
Also visible at the top of the screen are the name of the current design file, the size of the design, and the
position of the crosshairs. A letter appears next to the name of the current design file to indicate what
type of design it is: (D) indicates it is a design; (G) indicates it is a grouped design; and (R) indicates it is a
repeated design.
To get on-screen help
• Press
Help
and then press the button or menu option for which you need help to display the Help
pop-up box. Exit Help mode by pressing the Help button again or pressing the Close button (red X).
To cycle the needle up or down to form a half stitch
The Half Stitch button cycles the needle either to the up or the down position based on the current
position of the needle.
• Tap
Half Stitch
once to cycle the needle a half stitch.
To cycle the needle to the up position
The Full Stitch button cycles the needle a full stitch to the up position. If the needle is in the down position,
it will move only a half cycle so it stops in the up position. Subsequent presses of the button, however, will
cycle a full stitch, always ending with the needle in the up position.
• Tap Full Stitch once to cycle the needle a full stitch.
To display the on-screen grid
• Press Grid to turn the grid on or off.
Depending on the zoom level, the lines may indicate either one-inch or one-quarter inch gradations.
Press to close any
pop-up box, such as
a Help box