handi quilter Pro-Stitcher QM30010-2, User Manual

Page: 100 / 139

www.HandiQuilter.com Quilt Menu | 7.7
• Choose Tie-Off Start or Tie-Off End to indicate your preference for tieoffs. Choose whether to use a
tacking stitch or micro stitches for the tieoffs. If you do not select either tieoff option, you will need
to manually do the tieoffs.
To change the thread pullup settings while quilting
Indicate how to pull up the bobbin thread before quilting a design. Pull-up On brings up the bobbin thread
and disables the motors for you to move the machine and pull up the bobbin thread. Pull-up Auto brings
up the bobbin thread and then automatically moves the machine aside and pauses for you to grab the
threads. In each case, press Resume to continue after grabbing the threads. For more information about
the pullup options, see
Control how Pro-Stitcher handles bobbin-thread pullups
in chapter 8, Settings
Menu.
• Choose Pull-up On or Pull-up Auto to indicate your preference for handling pullups. If you do not
select either pullup option, you will need to manually pull up the bobbin thread before stitching.
To change the pause delay settings while quilting
After beginning to stitch and following a pullup, Pro-Stitcher does some stitches and then pauses for you
to cut the threads. The pause delay setting indicates how much stitching to do, measured in either inches
or seconds, before pausing. For more information about the pause delay options, see
Control the delay
following a bobbin-thread pullup in chapter 8, Settings Menu .
Select to tie off at the
end of stitching.
Select to tie off at the
beginning of stitching.
Choose whether to
tie off with a tacking
stitch or with micro
stitches.