handi quilter Pro-Stitcher QM30010-2, User Manual

Page: 123 / 139

9.6 | Troubleshooting www.HandiQuilter.com
Problem/Symptom Corrective Measure
Buffer Underflow If a message with the words Buffer Underflow appears
while stitching, it is an indication that data is not getting
to the motors quickly enough. This may be due to
something in the computer tying up the CPU. Although
it may be possible to resume quilting by simply pressing
red X box to close the error message and then pressing
the Motor Error lightning bolt button at the top right-
hand corner of the screen, it is best to cancel the
current design stitch-out, save the pattern, and re-boot
the computer. Use the New Start Point function
if necessary to resume from where stitching was
left off.
System Restore or System Repair message
on boot-up.
If a message appears on boot-up (black screen, white
text) that asks whether to run System Restore or Start
Windows Normally, select Start Windows Normally by
using the volume buttons on the tablet to move your
selection up or down and use the “Windows” button
to select “Start Normally.” The system should resume
as normal. The computer will default to the System
Restore screen (more of a typical Windows blue/white
screen) if you do not select the Start Normally option in
time. If this occurs, use the power switch to reboot the
computer and try again.